Soundboard crown

[Erwinspiano@aol.com]

---------------------- multipart/alternative attachment
In a message dated 8/10/2003 3:05:12 PM Pacific Daylight Time, 
sec@overspianos.com.au writes:

> As Dale mentioned in his post (hi Dale its good to read that you're back), 
> a down bearing load on a flat panel will cause the panel to experience 
> tension as it is forced down into a reverse crown. 

           Thanks Ron. Good to be back. Hope all is well
            Regards -Dale

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/d1/0e/8a/fe/attachment.htm

---------------------- multipart/alternative attachment--