Graphite on Samick Center Pins?

Roger Jolly roger.j@sasktel.net
Thu, 14 Aug 2003 09:35:33 -0600


---------------------- multipart/alternative attachment

Hi Dave,
                Contact Robert at Samick he will give you the authorization 
to do warranty work,  He is aware of the problems.

But first contact the dealer, he may be able to help.

The principal problem is graphite that has been applied too thick. There 
was a plating issue, but not that recent.

The graphite has now been dropped from all Samick action parts.  Products 
that have all Renner parts will have a light coat of graphite on the cloth.

I would respectfully suggest, that you not refer to the instrument as a 
PSO, if you are looking for max cooperation.

Hope this helps.
Regards Roger





     At 11:07 PM 8/13/2003 -0400, you wrote:
>Good evening List,
>
>I got up this morning bright and early and headed into San Francisco for 
>what I thought was a routine tuning.  It turned out to be a 3 1/2 hour 
>pin-a-thon.
>
>Before I could even tune this little PSO--a Samick SG 150 with a 
>Pianomation player unit--I had to deal with what I thought was regulation 
>issues, but turned out to be bound up centers, mostly on balanciers, but 
>some hammers, jacks, and whippen heel flanges were also victimized.
>
>The original pins were contaminated to the point where each time I pushed 
>one out, it was a struggle to get it to break free, and I thought the 
>bushings were going to come out with the pins.  Fortunately, that didn't 
>occur.  But there was a black substance coating the pins at the point 
>where they pivoted on the flanges.
>
>I am certain that I will be called back soon.  There will be more binding 
>centers, and I'll wager that the flange bushings will have to be replace 
>before too long. I have a call in to Samick for possible warranty 
>reimbursement for the customer, and I'm wondering if I should ask for a 
>set of replacement whippens(keep dreaming, Dave).
>
>At first I thought that something had been spilled in the action, but 
>there is no evidence of liquid contamination(other than blood from my 
>finger from pushing too many pins through birdeyes), then I remembered the 
>recent thread about Renner actions using graphite covered pins.  Does 
>anyone know if Samick uses or has used these in the past?  The piano is 
>around three years old.
>
>Mr. Jolly, you can e-mail me privately on this if you'd like:  what is the 
>likelihood of any of the warranty reimbursements or replacements I 
>suggested?  The customer said that it has been going on since he got the 
>piano.
>
>Thanks in advance,
>
>Dave Stahl

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/cf/96/b2/1a/attachment.htm

---------------------- multipart/alternative attachment--

This PTG archive page provided courtesy of Moy Piano Service, LLC