More on soundboard crown

Farrell mfarrel2@tampabay.rr.com
Mon, 18 Aug 2003 07:25:48 -0400


And that is precisely why I wonder how it is that soundboard builders that adhere to the "don't change anything the original masters did" go about "duplicating" soundboards? I guess with a S&S, one can do it because I think their manufacturing techniques are well documented (not that many "duplicators" follow them anyway). It seems to me that just duplicating panel and rib dimensions and wandering off in various directions with machining ribs and drying panels would be a prescription for failure. I think experience working with a few particular piano models will certainly help direct these changes in a direction that produces "acceptable" results, but what if I ship a board from an 1887 Weber or Sohmer or A.B. Chase (a model perhaps not previously encountered - and certainly not encountered many times) to someone for "duplication"? How often is the "design" of the "duplicate" just going to be pulled out of thin air - or it worked on the model M, I think it will work on the Weber....?

Terry Farrell
  
----- Original Message ----- 
From: "Ron Nossaman" <RNossaman@cox.net>
To: "Pianotech" <pianotech@ptg.org>
Sent: Sunday, August 17, 2003 12:10 PM
Subject: Re: More on soundboard crown


> 
> >Is there any way to observe or measure a piano to determine whether its
> >soundboard is compression-crowned or rib-crowned?
> >
> >Fascinating discussion!
> >
> >--Cy Shuster--
> 
> 
> Not dependably, unfortunately. Compression crowned boards tend to have ribs 
> wider than they are tall, but that doesn't really tell you much. Even a 
> soundboard you know to have been built with crowned ribs can still be 
> primarily compression crowned and supported - like Baldwin. This is the 
> point I attempted to make with John Hartman that the dimensions and mass of 
> the parts aren't the sole determinants of where the stiffness comes from. 
> The assembly method is the part you can't see by looking at the finished 
> product.
> 
> Ron N
> 
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives

This PTG archive page provided courtesy of Moy Piano Service, LLC