-----Original Message----- From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org]On Behalf Of Joseph Garrett Sent: Monday, August 25, 2003 10:32 AM To: pianotech@ptg.org Subject: Re: Big Bushings/Ron Nossaman That would work, ONLY if the stock was cut to the proper thickness and the holes were drilled all the way through. Joe Garrett, RPT, (Oregon) Captain, Tool Police Squares Are I Joe The splintering nor the stock thickness would matter because the bushings will be cut to the proper length with the bandsaw leaving the splintered bottoms in the scrap. Paul C _
This PTG archive page provided courtesy of Moy Piano Service, LLC