>I'm not sure what you are asking in regards to "keep the thing together?". >The piano HAS to have been designed for 7/16" bushings, in the first place. >I don't know of any other piano with this "feature", except Kimball. Perhaps >a bit of clarification on your question? >Best Regards, >Joe Garrett, RPT, (Oregon) I meant keep the bushing together. The difference between Kimball's 1/2" bushings and everyone else's means thinner walls in the bushing in everyone else's. There has to be a point where there isn't enough integrity to the short cross ply to hold the bushing together. Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC