Subject: RE: Big Bushings/Ron Nossaman Paul & Joe, Is this doable in 7/16" bushings and still keep the thing together? Ron N Can't say yet. Paul C ------------------------------ It is doable, but I don't think it would be cost effective nor a solid a feel, as there is less wood around the pin. (Less than 1/16"!) The other problem, may be, that the 1/2" plug cutters are prolific, but 7/16" not so readily available. Best Regards, Joe Garrett, RPT, (Oregon) Captain, Tool Police Squares Are I
This PTG archive page provided courtesy of Moy Piano Service, LLC