Elbow spinner

[Greg Newell]

---------------------- multipart/mixed attachment
Carman and list,
         Why not just heat the wire with a propane torch and push the elbow 
on? Much faster and easier. I learned that here on the list! Great place 
this list!!!


Greg Newell


At 01:54 AM 2/3/2003, you wrote:


>   This is probably not an original idea, but I have not seen or heard of 
> it yet.
>
>    A handy tool to spin new plastic spinet elbows onto the drop sticker 
> wires is a TUNING FORK.  I figured it out in a moment of 
> desperation.  Place a tubular hammershank repair sleeve on the stem of a 
> "John Walker" blue steel fork and chuck it into a drill-driver.  The fork 
> engages the plastic elbow very well to spin it onto the wire.
>
>   Learn other great techniques at the sunny California State Conference 
> this month.  Visit the link at www.ptg.org/events.php
>
>Carman Gentile RPT
>
>
>_______________________________________________
>pianotech list info: https://www.moypiano.com/resources/#archives
>

Greg Newell
mailto:gnewell@ameritech.net 

---------------------- multipart/mixed attachment--