Knabe Grand/Plugs

[Ron Nossaman]

>I would think with 3/4" plugs, some of the plugs would have a glue joint 
>running right through the middle of the tuning pin hole. I should think 
>that if 3/4" inch plugs were needed to improve the structural integrity of 
>the block, the block was not a good candidate for plugging in the first 
>place. But I could be wrong.
>
>Terry Farrell

That's one reason I used 1/2". I'd have used 7/16" if I'd have had them. 
But the only reason I didn't replace the block was the time crunch and my 
own uncertainty as to how long I'd be there fitting it. I was already too 
tired and beat up by then to chance it.

Ron N