Dale, I make them, using a deep throat "Tenon Cutter". I have them in 1/2" also, but seldom use those. This requires you learning how to sharpen the dang things, as the Delignet really dulls the cutters! It is a tedious job, but the end results are quite good. If you will recall, I am always sending out requests for "Scrap PinBlock Material"; this is why. Because I work on those dreaded "Really Olde" pianers, this is a system that is the lesser of many evils. <G> Best Regards, Joe Garrett, RPT, (Oregon) Been There, Didn't Like It, So I'm Here To Stay! [G}
This PTG archive page provided courtesy of Moy Piano Service, LLC