Open-Face Pinblock & Stringing

[Farrell]

I see yours on your web site. Is the steel on your tip harder than that used on the APSCO variety?

Terry Farrell
  
----- Original Message ----- 
From: "Joe And Penny Goss" <imatunr@srvinet.com>
To: "Pianotech" <pianotech@ptg.org>
Sent: Wednesday, January 01, 2003 8:31 PM
Subject: Re: Open-Face Pinblock & Stringing


> yes<G>
> Joe Goss
> imatunr@srvinet.com
> www.mothergoosetools.com
> ----- Original Message -----
> From: "Farrell" <mfarrel2@tampabay.rr.com>
> To: "Pianotech" <pianotech@ptg.org>
> Sent: Wednesday, January 01, 2003 5:50 PM
> Subject: Re: Open-Face Pinblock & Stringing
> 
> 
> > I have the coil tightening tool that has a weight on a shaft that you bang
> upwards. I've only restrung a couple pianos with it, but it seems as though
> the edges that should hook onto the coil have rounded off and each time you
> bang the weight, it just jumps off the coil. I likely bought mine from
> Schaff or APSCO. Is there a better quality one available?
> >
> > Terry Farrell