Hi Terry, All tips are special order and must be made from scratch. We need to know the size pin you need the tool for. Metric or inch and go from there. The tips that we use will not fit your tool, as the bolt is a bigger size! and longer. On hand is a #3 tip Joe Goss imatunr@srvinet.com www.mothergoosetools.com ----- Original Message ----- From: "Farrell" <mfarrel2@tampabay.rr.com> To: "Pianotech" <pianotech@ptg.org> Sent: Thursday, January 02, 2003 6:24 PM Subject: Re: Open-Face Pinblock & Stringing > Do you have different tips available? What tips do you have available for what size pins? > > Terry Farrell > > ----- Original Message ----- > From: "Joe And Penny Goss" <imatunr@srvinet.com> > To: "Pianotech" <pianotech@ptg.org> > Sent: Thursday, January 02, 2003 10:45 AM > Subject: Re: Open-Face Pinblock & Stringing > > > > Hi, > > On the coil lifting tool, one should have different tips for the different > > size tuning pins if you plan on doing a lot of restringing. > > As I do very little, holding the tool firmly against the tuning pin gets me > > by. But then that is one reason my tool is larger than the Schaff tool. > > > > > > Joe Goss > > imatunr@srvinet.com > > www.mothergoosetools.com > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC