Big Action Rail Pins

[Joe And Penny Goss]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
Terry,
Can the pins be pushed out with a drill press from the back side? If so =
replate.
Joe Goss
imatunr@srvinet.com
www.mothergoosetools.com
  ----- Original Message -----=20
  From: Erwinspiano@aol.com=20
  To: pianotech@ptg.org=20
  Sent: Sunday, January 05, 2003 3:33 AM
  Subject: Re: Big Action Rail Pins


  In a message dated 1/4/2003 5:58:40 PM Pacific Standard Time, =
mfarrel2@tampabay.rr.com writes:


    Subj: Big Action Rail Pins=20
    Date: 1/4/2003 5:58:40 PM Pacific Standard Time
    From: mfarrel2@tampabay.rr.com
    Reply-to: pianotech@ptg.org
    To: pianotech@ptg.org
    Sent from the Internet=20

            Terry


      Check the hardware store there called finish nails. Grin. Isn't =
that helpful?
            Dale



    Repinning the action rails on a turn-of-the-century Knabe grand. =
Center rail pins are round and 0.153" diameter. Front rail are oval and =
0.155" diameter. Neither Schaff nor Pianotek list these sizes. Anyone =
know of their availability anywhere?

    Terry Farrell




---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/0b/85/97/6a/attachment.htm

---------------------- multipart/alternative attachment--