David Love wrote: > > That's a good reason to opt for moving the capstan rather than the knuckle > to fix a problem action. Small deviations in cutting the new notch for the > knuckle will make quite a large difference. The capstan placement is more > forgiving. > > David Love > Grin... very good point. There is a way around that problem however. Enlargen the notch to just a tad more then you need for two knuckles, and THEN fill the back side of the notch with appropriately thick material. Glue knuckels then as usual, with perhaps a bit more liberal amount of glue. Sorta like hang'n hammers otherwise. Cheers RicB -- Richard Brekne RPT, N.P.T.F. UiB, Bergen, Norway mailto:rbrekne@broadpark.no http://home.broadpark.no/~rbrekne/ricmain.html
This PTG archive page provided courtesy of Moy Piano Service, LLC