warped keys

[Ron Nossaman]

>Ron
>I was taught to straighten keys this way.  Work from the bottom of the key
>to cut the appropriate kerf(s), shim with veneer if required and apply
>epoxy.  Some finesse with shaping, spacing, and levelling and the repair is
>virtually invisible.
>
>Paul Chick

Hi Paul,
Unfortunately, I figured it out on my own (way back when), after wasting a 
day or two trying the heat and moisture thing. I'm apparently bend 
challenged, but kerfing works for me. Happily, it doesn't come up that often.

Ron N