Hi Terry, That's a common problem with the Baldwin wippens. Hold the button with a pair of parallel pliers, and drive the regulating screw further into the button., whilst gripping the button. Maybe I have been lucky but it has always worked for me. What do you mean Horse shoes?????????? Regards Roger At 11:26 PM 1/13/2003 -0500, you wrote: >Yes I do. There is a wippen that works perfectly.........except for the >rep lever height adjustment screw. It is tall and the hammer shank rests >about 1/2 mm above it at rest. When you release the key, the hammer shank >bashes into the screw top. Major nasty click. There is another one in the >Renner kit where the jack rests against a piece of cloth mounted on a big >wooden upright stick, rather than a spoon. The stick also has a screw in >the top of it for the rep lever height adjustment. This wippen also works >quite well, except it has the little cut in the rep lever top where the >knuckle contacts the rep lever. It really makes for a lot of friction I >think because the knuckle is digging right into that cut/slit. Just >thinking here that if I can get an exact duplicate of the originals, I >might be better off. The geometry is good on the originals. > >Terry Farrell > >----- Original Message ----- >From: "David M. Porritt" <dm.porritt@verizon.net> >To: <pianotech@ptg.org> >Sent: Monday, January 13, 2003 4:39 PM >Subject: Re: Baldwin Wippen > > > > Terry: > > > > Can't you use something from Renner? Do you have their sample kit? > > > > dave > > > > *********** REPLY SEPARATOR *********** > > > > On 1/13/2003 at 3:35 PM Farrell wrote: > > > > >I need to buy a set a Baldwin grand wippens. If Baldwin is the best > > place > > >to go - where is it I go now-a-days. I've tried calling Gibson > > customer > > >support a bunch of times, but have not gotten anywhere. If not, > > where > > >else? Web address? Telephone number? > > > > > >Thanks. > > > > > >Terry Farrell > > > > > >_______________________________________________ > > >pianotech list info: https://www.moypiano.com/resources/#archives > > > > > > _____________________________ > > David M. Porritt > > dporritt@mail.smu.edu > > Meadows School of the Arts > > Southern Methodist University > > Dallas, TX 75275 > > _____________________________ > > > > > > _______________________________________________ > > pianotech list info: https://www.moypiano.com/resources/#archives >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC