Yes a 1935 weber 7' grand Joe Goss imatunr@srvinet.com www.mothergoosetools.com ----- Original Message ----- From: "Keith Roberts" <kpiano@goldrush.com> To: "Pianotech" <pianotech@ptg.org> Sent: Friday, January 24, 2003 11:03 AM Subject: Re: Jacob Doll action brackets > Come on Terry. Have you EVER seen an action bracket made out of wood? That > was built later than 1880? > Keith R > > ----- Original Message ----- > From: "Farrell" <mfarrel2@tampabay.rr.com> > To: "Pianotech" <pianotech@ptg.org> > Sent: Friday, January 24, 2003 3:41 AM > Subject: Re: Jacob Doll action brackets > > > > Gordon might have the right idea, but you might get a stronger unit if you > epoxy-laminate some hard maple together and cut them out of that on a band > saw. I guess you could also take a hunk of Delignite pinblock material and > cut them out of that. I shouldn't think if too difficult to do. > > > > Terry Farrell > > > > > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC