Still Try THIS puzzler!

[Dave Bunch]

Bottom nut on key rail support bolt has spun its way down to where it is
binding against the keys.

Dave Bunch

----- Original Message -----
From: "pianolover 88" <pianolover88@hotmail.com>
To: <pianotech@ptg.org>
Sent: Wednesday, January 29, 2003 11:58 PM
Subject: Re: Still Try THIS puzzler!


> Not the keyslip; and it is a vert, btw. Again, action or keys NOT the
cause.
>
>
>
> Terry Peterson
>
>
>
>
> ----Original Message Follows----
> From: "Keith Roberts" <kpiano@goldrush.com>
> Reply-To: Pianotech <pianotech@ptg.org>
> To: "Pianotech" <pianotech@ptg.org>
> Subject: Re: Try THIS puzzler!
> Date: Wed, 29 Jan 2003 20:01:40 -0800
>
> The keyslip binding against the front of the key.
> Keith R
> ----- Original Message -----
> From: "pianolover 88" <pianolover88@hotmail.com>
> To: <pianotech@ptg.org>
> Sent: Wednesday, January 29, 2003 6:50 PM
> Subject: Try THIS puzzler!
>
>
>  > customer calls complaining of two sticking keys. Got there and checked
it
>  > out. Problem was NOT in the action, or keys. what was causing the keys
to
>  > stick?
>  >
>  >
>
>
>
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives
>
>
> _________________________________________________________________
> Tired of spam? Get advanced junk mail protection with MSN 8.
> http://join.msn.com/?page=features/junkmail
>
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives