Hey, Router Rooters

[Alan]

RE: Trimming fronts

Do you sand, route, or saw?

I've used a power miter saw to do it but it's hard to make the depths
even.

Alan R. Barnard
Salem, MO

-----Original Message-----
From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On
Behalf Of Ron Nossaman
Sent: Saturday, July 05, 2003 12:23 PM
To: Pianotech
Subject: Re: Hey, Router Rooters


>Any hints or warnings about going from ivories to Schaff tops with
fronts?

Two:
Remove the ivories before routing.
Trim the fronts off to accommodate the thickness of the replacements.

Ron N

_______________________________________________
pianotech list info: https://www.moypiano.com/resources/#archives

---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.495 / Virus Database: 294 - Release Date: 6/30/2003
 

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.495 / Virus Database: 294 - Release Date: 6/30/2003