brass flanges

[Jack Houweling]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
Hi Joe

Yes this one has the silk cord.
  ----- Original Message -----=20
  From: Joe And Penny Goss=20
  To: Pianotech=20
  Sent: Thursday, July 17, 2003 6:28 PM
  Subject: Re: brass flanges


  Hi Jack,
  Is this the Chickering that has a silk cord tied into a brass plate? =
The cord then catching the hammer return spring?
  If it is, All the damper assemblies have to be installed after the =
cords are hooked up.
  Joe Goss
  imatunr@srvinet.com
  www.mothergoosetools.com
    ----- Original Message -----=20
    From: Jack Houweling=20
    To: pianotech@ptg.org=20
    Sent: Thursday, July 17, 2003 6:54 PM
    Subject: brass flanges


    Hello

      I am rebuilding a chickering upright. This one has the brass =
flanges. They all work good. My question is should the brass flanges be =
changed to wood? If so why?  Is the reason for changing the flanges =
because they break or is there something more?

    Jack Houweling

       =20

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/4f/0b/cb/a7/attachment.htm

---------------------- multipart/alternative attachment--