This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment contact cement on the top of the tape against the wire James Grebe Piano Tuner-Technician Wood Artisan Established 1962 Creator of Wooden Artifacts such as: Handsome Hardwood Caster Cups Handsome Hardwood Piano Benches 314 845-8282 1526 Raspberry Lane Arnold, MO 63010 ----- Original Message -----=20 From: Keith Roberts=20 To: Pianotech=20 Sent: Thursday, July 24, 2003 1:35 PM Subject: bridle wire design Not the normal twist. The end of the tape just pushes over the wire = and the bend in the wire keeps the tape from sliding down the wire. The = bend doesn't hold the tape captive.=20 I'm sure you all see what this is leading to. The hole in the end of = the tape has become enlarged and the wire, which is acting like a = mechanical bull, throws the tape off. The problem is that occasionally = the end of the tape interferes with the action. Any simple solutions? Keith Roberts ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/37/17/5e/38/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC