----- Clyde Hollinger <SNIP>I was installing a Piano Saver system in a 1977 Yamaha console. When I came to install the fill tube, I found that the kneeboard came to within 1/4" of the keybed, which is not enough clearance for the tube! Has anyone run into this before? I'm sure someone has, but it was a first-time for me.<SNIP> Regards, Clyde Hollinger, RPT Clyde, Yes, I cut a slot using a fine blade hand saw and a chisel ( the width of the tube)At the top of the lower front panel near the catch. Five minutes work and the slot is out of sight . Tom Driscoll
This PTG archive page provided courtesy of Moy Piano Service, LLC