Stienway sustenuto bar

[Delwin D Fandrich]

----- Original Message -----
From: "Bill Pillmore" <billpillmore@earthlink.net>
To: "Pianotech" <pianotech@ptg.org>
Sent: June 05, 2003 6:22 AM
Subject: Stienway sustenuto bar


> Does anyone know the best way to reattach the wire loop where the monkey
> hooks to the sustenuto bar.  The holes have wallowed out and the wire
> won't stay in.  Do I need to have it brazes?
> Thanks Bill Pillmore


That, or you try hard soldering it. Not quite as strong a joint as brazing
but usually strong enough.

Del