curing loose t-pins w/sandpaper

[Avery Todd]

Hi Daniel,

Sorry. I'm just not willing to take the chance on worsening an already
bad problem just because someone else might not like it! Especially on
old uprights! Maybe I've just been doing this too long!

Avery

>I would therefor set up a date when I could come back to
>replace the pins with one from a left-over pin from a previous restrining
>job.
>
>Perhaps its OK to use sandpaper. Here in Sweden I would fear that if some
>other tech comes and see my sandpaper-fix would put me in trouble, but I
>guess noone would care if its one of those everyday-piano wich is in bad
>shape besides loose tuning pins.
>
>Best regards,
>Daniel Lindholm
>
>----- Original Message -----
>From: "Avery Todd" <avery@ev1.net>
>To: "Pianotech" <pianotech@ptg.org>
>Sent: Sunday, June 08, 2003 11:10 AM
>Subject: Re: curing loose t-pins w/sandpaper
>
>
> > Daniel,
> >
> > Something I've heard many times to be aware of is that if a pin is
> > loose because of a split beginning in the block, an oversize pin
> > "could" enlarge the crack, making the looseness extend to even more
> > pins. Just a thought.
> >
> > Avery
> >
> > At 01:07 AM 06/08/03 +0200, you wrote:
> > >That sounds like a really temporary fix. Why not replace the pins with
> > >larger while you are at it?
> > >
> > >----- Original Message -----
> > >From: "Clyde Hollinger" <cedel@supernet.com>
> > >To: <pianotech@ptg.org>
> > >Sent: Saturday, June 07, 2003 9:24 PM
> > >Subject: curing loose t-pins w/sandpaper
> > >
> > >
> > > > Friends,
> > > >
> > > > I service an old upright with several very loose low bass tuning pins.
> > > > Two of them won't even hold a pitch.  I tried epoxy on them, but that
> > > > didn't work.  I'd like to try sandpaper in the holes.
> > > >
> > > > For those who have done this successfully, what type of sandpaper and
> > > > what grit do you use?  Can I just drive the tuning pin in the hole
>after
> > > > fitting a sandpaper shim, or should the pin be turned in?  I'd like to
> > > > give this a try on Monday.  Thank you.
> > > >
> > > > Sincerely,
> > > > Clyde Hollinger, RPT
> > > > Lititz, PA
> > > >
> > > > _______________________________________________
> > > > pianotech list info: https://www.moypiano.com/resources/#archives
> > > >
> > > >
> > >
> > >
> > >_______________________________________________
> > >pianotech list info: https://www.moypiano.com/resources/#archives
> >
> > _______________________________________________
> > pianotech list info: https://www.moypiano.com/resources/#archives
> >
> >
>
>
>_______________________________________________
>pianotech list info: https://www.moypiano.com/resources/#archives