PVC-E & Sharps

Alan tune4u@earthlink.net
Sun, 8 Jun 2003 21:47:44 -0500


This was a post I put up about my experience with PVC-E and sharps--with
a little bit of CA on the ends. They seem to have held real well, even
the two I dropped!

https://www.moypiano.com/ptg/pianotech.php/2003-May/134749.html

Alan R. Barnard
Salem, MO

-----Original Message-----
From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On
Behalf Of Dave Davis
Sent: Sunday, June 08, 2003 9:06 PM
To: pianotech@ptg.org
Subject: PVC-E & Sharps

Hi All,

I've been researching the Archives on PVC-E glue and
found lots of entries with mostly positive results as
an adhesive for keytops (naturals).

Does PVC-E work equally as well on plastic sharps?  I
found only one reference in the archives.

Thanks,
Dave Davis
Renton, WA

__________________________________
Do you Yahoo!?
Yahoo! Calendar - Free online calendar with sync to Outlook(TM).
http://calendar.yahoo.com
_______________________________________________
pianotech list info: https://www.moypiano.com/resources/#archives

---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.488 / Virus Database: 287 - Release Date: 6/5/2003
 

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.488 / Virus Database: 287 - Release Date: 6/5/2003
 


This PTG archive page provided courtesy of Moy Piano Service, LLC