> Are you saying it's very hard to get the strings back in alignment with the > dampers in such situations, even if you just lower the tension to pound the > dust out of the windings, and raise it back up again? > --Cy Shuster-- > Rochester, MN Maybe not just letting the them down. My bad experience came from letting down, taking off the H pin, rolling and twisting (or untwisting) as necessary. The spacing and consequent damper action was disiaster. After that I didn't want to chance the debacale by simply letting them down and raising up again. But if some brave soul wants to experiment we are all ears. ---rm > > ----- Original Message ----- > From: "Richard Moody" <remoody@midstatesd.net> > To: "Pianotech" <pianotech@ptg.org> > Sent: Monday, June 09, 2003 12:18 AM > Subject: Re: George Steck grand > > > > Watch out for damper problems in agraffeless basses if you do > > something like "rolling the bass" or simply letting down the bass. > > You may never get them to work like they used to. Or before you > > start make sure the owner knows how the dampers are working or not > > working. ---rm > > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC