Bridle Wire-Broken at Wippen/Gordon

[Joseph Garrett]

I've seen two different types of "Bridle Wires". One is "pressed" in. The
other "screws" in! Rather than trying to "pull" the Bridle wire out, try
unscrewing it. Oh, BTW, just drill an appropriate size hole right next to
the broken stub and insert a replacement, rather than trying to "dig" the
"stub" out. DAMHIK!
Best Regards
Joe Garrett, RPT, (Oregon)

Been There, Didn't Like It, So I'm Here To Stay! [G}