At 08:22 PM 06/26/03 -0500, you wrote: >If you are not wrong, then Mapes doesn't know what they are asking. Which makes me wonder if they'd make the bass strings with a big enough loop to go onto that hitch pin! :-) Avery >Once >again, I'll have to go to Baldwin to find out what they say. The hitch pins >were quite large, I remember that, so I'll be they are the 1/4 inch variety. >I have no idea what other sizes they have. Why couldn't Baldwin just put in >a regular hitch pin and plate. I don't hear any great difference for all >that "technology". I guess they just wanted to be different. Thanks for the >input. > >Richard > >-----Original Message----- >From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org]On >Behalf Of Avery Todd >Sent: Thursday, June 26, 2003 7:09 PM >To: Pianotech >Subject: RE: Accu-Just Hitch Pins > > >Richard, > >I wasn't aware that Baldwin had ever had more than one size of the >Accu-Just hitch pins! Am I wrong? > >Avery > >At 01:37 PM 06/26/03 -0500, you wrote: > >I was contacted by Baldwin today by email. Thomas Malone informed me on > >the stringing scheme for the plain strings, but neglected to tell me about > >the bearing settings, so I have to get back to him on than. Mapes can make > >the strings, but need to know if the hitch pins are the 1/4" variety, so I > >have to make another trip back. I have to go back anyway, as I have to > >pull a tuning pin to measure it also. Thanks again for all your help. > > > >Richard > >>-----Original Message----- > >>From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org]On > >>Behalf Of Kevin E. Ramsey > >>Sent: Tuesday, June 24, 2003 9:15 PM > >>To: Pianotech > >>Subject: Re: Accu-Just Hitch Pins > >> > >>Hi, Richard. Let us know if and when you get contacted by Baldwin, will > >>you please? > >>Kevin > >>>----- Original Message ----- > >>>From: <mailto:rstrang@pa.inter.net>Richard Strang > >>>To: <mailto:pianotech@ptg.org>'Pianotech' > >>>Sent: Tuesday, June 24, 2003 3:39 PM > >>>Subject: RE: Accu-Just Hitch Pins > >>> > >>>My major problem is I'm alone here in Panama. There are no other > >>>technicians around that could possibly help me in a dream. If this > >>>Baldwin is so particular as to how the string is put around the hitch > >>>pin, God help the ambassador's piano if she gives the job to someone > >>>other than me. I will have to buy a down bearing gauge and learn how to > >>>use it. I have already sent an email to Baldwin to get information as to > >>>the stinging scheme and the down bearing measurements. Thanks for the >input. > >>> > >>>Richard > >>> > >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives > >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC