The tails look just like the ones on the YC action I have in my shop. I will be reshaping the tails. Terry Farrell ----- Original Message ----- From: "Richard Brekne" <Richard.Brekne@grieg.uib.no> To: "PTG" <pianotech@ptg.org> Sent: Saturday, June 28, 2003 6:33 PM Subject: Nice Tails ??? > > Ok guys and gals.... not going to mention where this picture comes > from... I'll let the owner pipe in if he/she wants too.. > > But somebody tell me if this kind of tailing is typical Steinway and > Sons NY factory work. > > RicB > > > [Image] > > -- > Richard Brekne > RPT, N.P.T.F. > UiB, Bergen, Norway > mailto:rbrekne@broadpark.no > http://home.broadpark.no/~rbrekne/ricmain.html > http://www.hf.uib.no/grieg/personer/cv_RB.html > > -------------------------------------------------------------------------------- > > Ok guys and gals.... not going to mention where this picture comes from... I'll let the owner pipe in if he/she wants too.. > But somebody tell me if this kind of tailing is typical Steinway and Sons NY factory work. > > RicB > > > > > -- > Richard Brekne > RPT, N.P.T.F. > UiB, Bergen, Norway > mailto:rbrekne@broadpark.no > http://home.broadpark.no/~rbrekne/ricmain.html > http://www.hf.uib.no/grieg/personer/cv_RB.html > >
This PTG archive page provided courtesy of Moy Piano Service, LLC