Or if you do want to go permanent, you are only talking about routing a length as long as your wire handle is wide and as tall and deep as the wire is thick. No big deal really. Terry Farrell ----- Original Message ----- From: "Keith McGavern" <kam544@gbronline.com> To: "Pianotech" <pianotech@ptg.org> Sent: Sunday, June 29, 2003 11:39 AM Subject: Re: Square Action Handle > At 10:26 AM -0500 6/29/03, Cy Shuster wrote: > >What kind of handle would be suitable for permanent installation? I'd love > >to add some to my own action ... > > Cy, > > I've never considered doing a permanent handle install. Don't see any > reason to do such a thing for such a little gain. > > There really wouldn't be a need to do such a thing on your own piano, > unless you are planning to do a lot of pulling the action. > > And if that's the case, just mount the temporary pull handles and > leave the keyslip off until you're done with whatever it is you're > planning on doing. > > Keith McGavern > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC