If I were not replacing hammers, I would consider only replacing knuckles if the shanks, flanges and action centers appeared in satisfactory condition. If I were replacing hammers, I would just replace all. Terry Farrell ----- Original Message ----- From: <Alltypetune@aol.com> To: <pianotech@ptg.org> Sent: Saturday, May 17, 2003 11:37 AM Subject: Re: Action Geometry Consistency > Sorry, I picked up on this discussion late. > > If the knuckles are bad, under what condition do you consider it best, in the > interest of time, to just replace the knuckles in lieu of new shanks and > flanges. > > Ron May > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC