This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment ----- Original Message -----=20 From: St=E9phane Collin=20 To: pianotech@ptg.org=20 Sent: Saturday, May 17, 2003 2:05 PM Subject: strings measures Hello to all. Does anyone have a good trick for acurately measuring string diameters = while still in the piano ? I normally use a micrometer on broken strings, but it is impossible to = put it between the strings that are still in place. I found that = caliper measurements are not accurate enough for proper use. Thanks St=E9phane Collin. _______________________________________________ pianotech list info: https://www.moypiano.com/resources/#archives I just loosen the string enough so I can get the micrometer around it, = then tune it back up. --David Nereson, RPT ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/07/c4/fe/4c/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC