This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment ----- Original Message -----=20 From: Phil Bondi=20 To: Newtonville=20 Sent: Tuesday, May 20, 2003 5:24 AM Subject: Acceptable Tuning Pin Height Good morning. I'll be finishing up a re-string today, with a little help from my = friend Dave Smith. >From you more experienced stringers out there, what is the height = from the plate that you feel is acceptable and workable for future years? In the past, I have tapped them in until the top of the threads just disappear into the nether region. Looking forward to your comments. -Phil Bondi (Fl.) phil@philbondi.com _______________________________________________ pianotech list info: https://www.moypiano.com/resources/#archives 3/16" to 1/4" from top of plate or pinblock to bottom coil. Don't = know why --just seems to be what most pianos have. =20 --David Nereson, RPT ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/a3/3a/0a/5c/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC