>> >What do bridge pin pounders that don't like to file use to regulate bridge >>>pin height. I find that using a little piece of wood as a gauge seems to >>>work well until you are finished, and then you realize your pin heights >> >are still undulating. You could make up a brass drill-stop, which will give you better control. See image of ours below; http://overspianos.com.au/dlst.html Ron O. -- _______________________ OVERS PIANOS - SYDNEY Grand Piano Manufacturers Web: http://overspianos.com.au mailto:info@overspianos.com.au _______________________
This PTG archive page provided courtesy of Moy Piano Service, LLC