Thanks. No way I'm going to get around cutting my own and having a big piece left over, I guess. Alan -----Original Message----- From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org]On Behalf Of JIMRPT@aol.com Sent: Monday, May 26, 2003 9:24 PM To: pianotech@ptg.org Subject: Re: Thanks, Dad! In a message dated 26/05/03 10:04:37 PM, tune4u@earthlink.net writes: << The only thing Schaff lists that might work is a piece of thick, uncut nameboard felt. >> Alan; Name Board felt, and its like(non woven), is not really suitable for desk slide bushing material. Use a key bushing type cloth (woven). The thickness really doesn't have a function other than to keep the desk from scratching up the slides..... btw... thinner is easier to work with than thicker when making those sharp turns. :-) Jim Bryant (FL) _______________________________________________ pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC