This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment So... I ask you... why we are supposed to measure down to the balance rail, and up to the capstan and at the same time not take into consideration the horizontal deflection of their angles before figuring their ratio ? [Image] Cheers RicB -- Richard Brekne RPT, N.P.T.F. UiB, Bergen, Norway mailto:rbrekne@broadpark.no http://home.broadpark.no/~rbrekne/ricmain.html http://www.hf.uib.no/grieg/personer/cv_RB.html=20 =20 =20 I don=92t know. But in this month=92s Journal, on page 36, that=92s = where it shows to measure. ;) --David Nereson, RPT, Denver=20 ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/4e/03/c8/c8/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC