Joe Garrett, RPT, (Oregon) Captain, Tool Police Squares Are I ----- Original Message ----- From: "Joseph Garrett" <joegarrett@earthlink.net> To: <oleg-i@noos.fr> Sent: Tuesday, November 04, 2003 7:01 PM Subject: Re: CP 70 Scale, was CP 70-80 regulation specs. > Isaac, > I just checked the CP-70 parts box! What I thought was a whole lot of one > thing turned out to be a fair amount of TWO things! I just discovered that > there are two thicknesses: Part #CX500060, Hammer Skin, Thick, 1.2mm, (I > suspect it's for the bass) & Part #CX500070, Hammer Skin, Thin, 0.93mm. I > hope that helps. I have more than sufficient to do several sets of hammers. > How many strips it takes, I don't remember, but I have 4 strips of the > "Thick" and 6 strips of the "Thin". Each strip is about 15 1/2" long, (sorry > for the English measurement, but I'm a Metric dufus!) If you take the width > of each hammer and calculate it out, we'll know how many strips will be > needed for a set of hammers. BTW, I don't remember where the "Thick" stops > and the "Thin" begins, so you'll need to check that out, as well.<G> (That > information might be in the manual, but right now, I just don't remember > what I did.) > Best Regards, > Joe Garrett, RPT, (Oregon) > Captain, Tool Police > Squares Are I > > ----- Original Message ----- > From: "Isaac sur Noos" <oleg-i@noos.fr> > To: <joegarrett@earthlink.net> > Sent: Tuesday, November 04, 2003 5:17 PM > Subject: RE: CP 70 Scale, was CP 70-80 regulation specs. > > > > Joe , thanks for the good news (leather for CP 70) > > > > I will check that with Yamaha france, but in case they can't find the > > reference (they don't know the refernece for the 0.008 paper punchings > > I buy them !) , could you check it in your archives. > > > > And eventually if it became deseperated will you be agreeing to sell > > me enough of that material to change a set ? > > > > > > Thanks and best regards > > > > Isaac OLEG > > > > ------------------------------------ > > PianoTech > > Isaac OLEG > > accordeur - reparateur - concert > > oleg-i@noos.fr > > 17 rue de Choisy > > 94400 Vitry sur Seine > > tel: 033 01 47 18 06 98 > > fax: 033 01 47 18 06 90 > > mobile: 033 06 60 42 58 77 > > ------------------------------------ > > > > > > > -----Message d'origine----- > > > De : pianotech-bounces@ptg.org > > > [mailto:pianotech-bounces@ptg.org]De la > > > part de Joseph Garrett > > > Envoyé : mercredi 5 novembre 2003 01:36 > > > À : pianotech@ptg.org > > > Objet : Re: CP 70 Scale, was CP 70-80 regulation specs. > > > > > > > > > Isaac said: "I've seen on the Yamaha owners manuals (on > > > line they are > > > available)2 > > > differenet tuning curves for the CP 70 and CP 80 (if memory > > > serves) . > > > > > > possibli the scaling changed also with different > > > generations of these > > > beasts. > > > > > > Joe did you use buckskin on the hammers, I can't see the artificial > > > leather sold separately, in fact only "Hammer assembly" is listed in > > > my parts manual for CP 70-80. > > > > > > The leather seem to be tense on the hammers. I wonder also if it can > > > be surfaced, needled, etc. > > > > > > Greetings. > > > > > > > > > > > > > > > > > > ------------------------------------ > > > PianoTech > > > Isaac OLEG > > > > > > Isaac, > > > Regarding the two "tuning curves" via Yamaha...it's > > > possible they changed > > > the scale, but I don't think the "tuning curves" has > > > anything to do with > > > that. Well, maybe. Who knows what evil lurks there!<G> > > > I did order the hammer "leather" separately. Matter of fact > > > I still have > > > some, (probably enough for another set. I usually order > > > things in sets of > > > two.) As for voicing of that stuff....as I remember I tried > > > and found that > > > it was a futile effort! And, yes, the hammer covering is > > > Tight, because the > > > synthetic buckskin comes with it's own adhesive back!<G> > > > Just checked my > > > stock and the stuff is still very supple and I have enough > > > for several sets > > > of hammers! As I recall, I ordered a bunch of the stuff > > > because I was going > > > to use it in some experiments on real pianos!!!! (Oh my, > > > use Yamaha parts on > > > something other than a Yamaha?!!!!!! Sacrilege!!!<G>)(I > > > hope they don't get > > > wind of it!<G>) > > > Regards, > > > Best Regards, > > > Joe Garrett, RPT, (Oregon) > > > Captain, Tool Police > > > Squares Are I > > > > > > > > > _______________________________________________ > > > pianotech list info: https://www.moypiano.com/resources/#archives > > > > > > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC