This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Everyone is talking about how hard Yamaha hammers are, yet I worked on a C7 where they were too soft. Any advice on how to bring up the brilliance once it's too low? Richard -----Original Message----- From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org]On Behalf Of Erwinspiano@aol.com Sent: Thursday, November 06, 2003 9:14 PM To: pianotech@ptg.org Subject: Re: Yamaha hammers So we consider thousand jab needling to be a voicing technique that is reserved for that special category of hammers that have apparently been quarried rather than manufactured, and yet must be brought somewhere near the edge of usability by whatever means we have available to us. As far as I'm concerned, if the manufacturer didn't want the piano to sound like a Xylophone on steroids, they would have put on a decent hammer in the first place. Ron N Well said Ron. I personally think if we all boycotted voicing this type of hammer under the umbrella of technician abuse we could probably get on the 6 ocklock news complaing of tennis elbow tnedonitis & hearing loss. Jump in osha!! Yes we could all carry placards & we could force the big Piano factories to Use more user /body freindly hammmers. Petrified felt would become extinct overnight...like the dinosaurs.hhmmmm right. I'm holding my breath some more. Bye Dale ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/60/59/30/08/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC