This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment This is good advice from Joe here, and the way that a lot of techs break = into the business. Try to get friendly with a local dealer, where you = can go in and tune the floor pianos when you can, since nobody owns them = yet, you're not going to get criticized if you make some mistakes on = one, the schedule would probably be whenever you can get around to doing = the tuning, and you might even get pointers from any other techs they = have around. Occassionally, the store owner may have pianos that need regulation work = done on them, and this would be an excellent way to learn that end of it = also. Kevin E. Ramsey RPT p.s. Don't let a dealer get behind in your payments. I know of one = tech who had a dealer owe him $4K, and then he went out of = business............. ----- Original Message -----=20 From: Joe And Penny Goss=20 To: Pianotech=20 Sent: Sunday, November 09, 2003 8:18 PM Subject: Re: on becoming a piano tech Hi Brad, Keep your day job and work into it take a good correspondence couse = like the=20 Randy Potter School of Piano Technology 61592 Orion Drive Bend Or 97702 541 382 5411 Join the guild and further your education by taking classes. Then when you feel comfortable make the switch if you feel you are = ready to full time piano tech. Joe Goss imatunr@srvinet.com www.mothergoosetools.com ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/fa/cc/9c/40/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC