Dave, Check the guide hole screws for the lid. If it is just a little loose, you'll get a rattle. Took me 15 minutes to find that the first time. On Thu, 20 Nov 2003 08:01:17 -0600 Dave Doremus <algiers_piano@bellsouth.net> writes: > Hey all, > > I have a nagging noise in the action of a two year old C2, > somewhere > between a click and a rattle, the quality of teflon bushing noise > but repeating a bit. If that makes any sense at all. Or possibly it > sounds like a little mini golf pencil in exactly the wrong spot on > the key where it can bounce off the capstan but not hit its > neighbors. It appears on F#3 and a little on F3 and A3, nowhere > else. > I have repinned, reglued hammer heads, tightened screws until I'm > blue in the face, even checked leg bolt washers, damper and > sostenuto > screws and key leads. Any ideas no matter how bizarre or obvious > would be appreciated. > -- > ----Dave > > > ----------------------------- > Dave Doremus, RPT > New Orleans > ------------------------------ > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives > Bill Schlipf Bloomington, IL ________________________________________________________________ The best thing to hit the internet in years - Juno SpeedBand! Surf the web up to FIVE TIMES FASTER! Only $14.95/ month - visit www.juno.com to sign up today!
This PTG archive page provided courtesy of Moy Piano Service, LLC