Hi Ron, Brazing works, unless it is that pot metal. Does brazing work on that? Regards, John M. Ross Windsor, Nova Scotia, Canada jrpiano@win.eastlink.ca ----- Original Message ----- From: "Ron Nossaman" <RNossaman@cox.net> To: "Pianotech" <pianotech@ptg.org> Sent: Monday, November 24, 2003 8:27 PM Subject: Re: action brackets needed > > >Hello all, > >I need some help, I recently got a marshall & wendell 1928, when I removed > >the action, I noticed the brackets were broke, and cracked , yes all of > >them, by the pictures in the schaff catalog I order the aeolian american > >108 model, ( the original brackets have the number 108 engraved). > >then ding dong! ups came with the brackets and voila, no match at all!!! > >this ones are shorter, the holes not match, the angles for the rails are > >all wrong etc etc > >anyone has any idea where I can find this brackets? > >thanks > >Eduardo Ch > > > Sounds like it was dumped on it's back. The couple of times I've run into > this, I brazed the old brackets back together. Finding direct replacements > will probably require getting very very lucky. > > Ron N > ---------------------------------------------------------------------------- ---- > > --- > > Checked by AVG anti-virus system (http://www.grisoft.com). > Version: 6.0.538 / Virus Database: 333 - Release Date: 11/10/2003 > ---------------------------------------------------------------------------- ---- > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC