At 09:47 PM 11/20/2003 -0600, Dave D. wrote:
>Thanks to all for good suggestions. I had already squeezed the key leads
>and produced it with the dampers lifted, dont think I included that in my
>original post. And I could not produce it out of the piano, which doesnt
>necessarily mean anything, the action cavity seems to act as a resonator
>sometimes. I like the balance hole (Mark), the pedal rod (JimB), and
>drop screw (DavidL) ideas as those were totally new to me. I'll post the
>answer when I find it.
Here's one more thing you might check. On a G2 I service there was a
similar clicking sound on some notes that I traced to a tiny bit of glue
squeeze on the knuckles of the offending notes. Trimming the glue with a
sharp knife solved the problem.
John
This PTG archive page provided courtesy of Moy Piano Service, LLC