Thank you Jim, that is the name of the stuff, I was trying to remember. Best, John John M. Ross Windsor, Nova Scotia, Canada jrpiano@win.eastlink.ca ----- Original Message ----- From: <JIMRPT@aol.com> To: <pianotech@ptg.org> Sent: Tuesday, November 25, 2003 1:53 PM Subject: Re: action brackets needed > > In a message dated 25/11/03 12:42:43 PM, Life4opera@aol.com writes: > > << so I took today one of > the old ones to a casting iron facility and see if they can come with a > affordable solution. > thanks for the help > Eduardo >> > > Eduardo; > Before going to all this trouble I think I would check and see if *J-B > WeldŽ* will do the trick for you. > J-B WeldŽ is a metalicized, two part epoxy and forms a very strong unit when > cured. > I would think that a thin strip of brass/steel/tin, etc. in conjunction with > the J-B WeldŽ laid on each side of the brackets would provide a very good > bond and probably be as strong as the original bracket. Anyhow it would be worth > experimenting with before going to all the expense and trouble of casting new > brackets. > My view. > Jim Bryant (FL) > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC