---------------------- multipart/alternative attachment
Bill
David Hughes Pianos in Baltimore Maryland makes lid reproductions for a
number of pianos. His add is listed in the journal or call David out of the
PTJ directory.--------Dale Erwin
A lot depends on the finish. If it is ebony, then it's not too hard to
make one in a home shop, with birch veneer-core plywood. If it to be
walnut, mahogany, or rosewood (did Baldwin do those?), then you may want to
contact the case part manufacturers listed in the directory.
So... what is the finish?
Regards,
Guy Nichols
At 06:23 AM 10/1/2003 -0500, you wrote:
>Have a querry. A rebuilder/friend of mine, Dave Blanchard RPT, has this
>instrument and it is missing its short lid. Any ideas?
>Bill Schlipf
>Bloomington, IL
>
>
>________________________________________________________________
>The best thing to hit the internet in years - Juno SpeedBand!
>Surf the web up to FIVE TIMES FASTER!
>Only $14.95/ month - visit www.juno.com to sign up today!
>_______________________________________________
>pianotech list info: https://www.moypiano.com/resources/#archives
---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/8b/49/a9/24/attachment.htm
---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC