Don't get the real cheap one with 3 wheels. John M. Ross Windsor, Nova Scotia, Canada jrpiano@win.eastlink.ca ----- Original Message ----- From: "Richard Brekne" <Richard.Brekne@grieg.uib.no> To: <davidlovepianos@earthlink.net>; "Pianotech" <pianotech@ptg.org> Sent: Thursday, September 11, 2003 1:24 PM Subject: Re: Band Saw Blade Teeth Material > > A long as this general subject is up,,, I've been wondering about buying a small > table model... with the small fairly thin blade. I think I would have more use > for this sized tool then a full blown floor job. So I was wondering if anyone > has some good recommendations for one of these. > > Cheers > RicB > > > -- > Richard Brekne > RPT, N.P.T.F. > UiB, Bergen, Norway > mailto:rbrekne@broadpark.no > http://home.broadpark.no/~rbrekne/ricmain.html > http://www.hf.uib.no/grieg/personer/cv_RB.html > > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC