The Stringer or a curtain rod?

[MKurta]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
    Hi Mickey:
    I have a stringer from Pianotek, and it works great on both =
verticals and grands!  But after seeing how it is made, you can make one =
up for a fraction of the price.  Go to your local auto supply store and =
buy a 3 ft section of 1/4" steel brake line, the straight kind, not the =
curved tubing.  Cut off one end and discard the threaded nuts that come =
with it.  Solder that end shut and drill two small holes through the =
solder at 9 and 3 o'clock.  The holes should be large enough to accept =
the largest plain wire size you may encounter.  VOILA!  You're done.
True it won't extend as the P-Tek, but you'll seldom need that feature.  =
Total expenditure: $5 and 1/2 hour of time. =20
    Mike Kurta
---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/ec/9b/f7/0e/attachment.htm

---------------------- multipart/alternative attachment--