Hi David, Yes I have already done that. However I got to thinking that there might be an error in the information that we were using and needed to double check. Nothing like charging off on a white steed without a saddle <G> Joe Goss RPT Mother Goose Tools imatunr@srvinet.com www.mothergoosetools.com ----- Original Message ----- From: "David Ilvedson" <ilvey@sbcglobal.net> To: <pianotech@ptg.org> Sent: Thursday, August 05, 2004 11:49 PM Subject: RE: Does any body really know__ what__ time it is Metric pins > Google metric conversion and "voila" > > David I. > > > > ----- Original message ----------------------------------------> > From: Kerry Cooper <brispiano@optushome.com.au> > To: <pianotech@ptg.org> > Received: Fri, 6 Aug 2004 09:50:39 +1000 > Subject: RE: Does any body really know__ what__ time it is Metric pins > > > >The correct conversion for #25 - 1.50 mm is 0.0590551". > > >You can get a metric conversion calculator made by 'Truly', I use it all the > >time. > > >Kerry Cooper > >Brisbane Australia > > > > >--- > >Outgoing mail is certified Virus Free. > >Checked by AVG anti-virus system (http://www.grisoft.com). > >Version: 6.0.734 / Virus Database: 488 - Release Date: 4/08/2004 > > > > >_______________________________________________ > >pianotech list info: https://www.moypiano.com/resources/#archives > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC