thanks to EVERYONE for their input on this matter. i plan on printing all this out and handing it to my boss. i have always been against lacquering hammers and here are just more reasons. fortunately for this little GE20, i have not been able to get my hands on any nitro cellulose lacquer this weekend. i'm not sure they'll have firmer punchings at the shop, but i'll look. in the meantime i'm going to try everything else i can for today. i think this may be one of those points where the technician butts heads with the salesman. i can understand the sales theory, that what the customer says, goes, and the man with the wallet can afford to ruin a set of kawai hammers if he wants to dish the cash to have a kawai that sounds like a pearl river. but it certainly bugs me from the standpoint of a technician-and-pianist living in an apartment who can't even afford her own piano. *grump* guess i need more coffee. thanks again, everyone. -ilex -----Original Message----- From: Isaac OLEG [mailto:oleg-i@noos.fr] Sent: Saturday, August 14, 2004 4:40 PM To: Pianotech Subject: RE: lacquering hammers hello, Andre forget the idea to try firmer punchings. Id say make some essay with firmer front punching, and regulate the hammer travel so the production of tone occur at the same moment that the key bottoms (try that with your customer) Indeed fine filing and good regulation can help a lot to begin with, on those pianos, the soft bottoming is taking of a lot of crispness and may be that is what bother the tone also. Best regards, and if the customer want a Pear River tone, he may buy a Pearl river, the musical intention of this brand is specific <G> Isaac OLEG (refraining from innerving !) -----Message d'origine----- De : pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org]De la part de ilex cameron ross Envoyé : samedi 14 août 2004 19:46 À : pianotech@ptg.org Objet : lacquering hammers greetings! YES those who are easily exasperrated by newbies can skip this if necessary. but up until now i've successfully avoided lacquering hammers and managed to brighten everything via fine-filing and ironing hammers. a good chunk of my experience and schooling has been on asian pianos that rarely if ever needed brightening anyway. however, i have a customer who just bought a kawai ge-20 and wants it to sound like a pearl river - ?!???!? so, i'm heading into the realm of lacquering hammers. what are some tips and things to avoid? what brands/types do you recommend for lacquer/thinner? btw, this is a last-minute service request, so i need to be able to get my supplies locally, at a hardware store or wherever. sorry if this is a repeat question and i'm showing my newbie hide here; i really have tried searching the ptg website for any archives or articles and it's not so friendly in that sense. or i'm an idiot - completely possible! thanks in advance for the help! -ilex _______________________________________________ pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC