Irregularities in key bushing

[Joe Garrett]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
Dean May said: "BTW, using this steam method to remove the balance rail =
felt actually
"sizes" the worn balance rail hole, closing it up a tad. This allows you =
to
ease it back up to the perfect size when installing. I use the Yamaha
capstan wrench: a very gradual taper that allows very uniform results."

Dean,
Shame shame! Try using the proper tool to "ease" the balance hole, (from =
the top down). It, too, is a Yamaha tool!<G> If you haven't seen one, =
I'll be glad to scan my version.
Best Regards,
    =20
Joe Garrett, R.P.T.
Captain, Tool Police
Squares R I
---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/05/22/cd/a0/attachment.htm

---------------------- multipart/alternative attachment--