Dampp Chaser and Drills

[Joe And Penny Goss]

Humm, A sneaky way to have the top of the piano sans pictures and knick-
nacks?
Joe Goss RPT
Mother Goose Tools
imatunr@srvinet.com
www.mothergoosetools.com
----- Original Message ----- 
From: "Don" <pianotuna@accesscomm.ca>
To: "Pianotech" <pianotech@ptg.org>
Sent: Saturday, December 04, 2004 10:07 PM
Subject: Re: Dampp Chaser and Drills


> Hi Cy,
>
> Next time just put the watering tube up the side of the piano and have the
> client open the lid to do their filling.
>
> At 11:00 AM 04/12/2004 -0500, you wrote:
> > I had to use a drill on an upright this week for the watering tube.  The
> bottom
> >panel on the U-3 fit very nice and tight all around.  I had to remove a
> half-inch
> >square at the upper corner.
>
> Regards,
> Don Rose, B.Mus., A.M.U.S., A.MUS., R.P.T.
> Non calor sed umor est qui nobis incommodat
>
> mailto:pianotuna@accesscomm.ca http://us.geocities.com/drpt1948/
>
> 3004 Grant Rd.
> REGINA, SK
> S4S 5G7
> 306-352-3620 or 1-888-29t-uner
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives