Overs Pianos wrote: >> >> Measuring the distance between strings and keybed, then hammer >> centers and keybed yeilded a near 2 mm difference when done on the >> bench visa vi done in the piano. At first I thought that well..... >> its a bit clumsy to measure in the piano.... so.... But then I got >> to thinking about bedding issues and decided to double check very >> closely in the piano and came up with very close to the same >> results. Obviously in this particular example, the bedding screws >> accounted for a quite significant difference in the height of hammer >> centers. This of course is directly reflected in the bore length one >> decides on, so its kind of important to get the darned thing right. > > > The bedding screw adjustment won't make a huge difference to the figures. > Hi Ron. In this case... they evidently do. Tho I'll be muffed with tomatoes if I know why at this point. Cheers RicB
This PTG archive page provided courtesy of Moy Piano Service, LLC